Z Blade Sigma Mixer
怎么买足球竞猜z blade mixer is suitable to knead different viscosity cmc,also used in chemical ,plastic,rubber,oil,carbon,medicine,food and other lines. z blade mixer machine is designed double shafts to stir,which can make material react fast and mix uniformly. there are three discharging types,such as hydraulic cylinder dumping,ball valve discharging and screw extrusion.
z blade mixer is designed for mixing, blending and kneading of medium and heavy on-flowing pastes. the z blade impellers and bowls are accurately machined to close tolerances, eliminating build up and providing high shear and rapid distribution of materials. this z balade mixer is well suited to high viscosity materials like grease, putty, toffee and bubblegum.
怎么买足球竞猜 the lab size sigma mixer is used for the mixing-kneading of materials with very high viscosities (over 500,000 cps). with its unique design of z-shaped mixing tools installed in two semi-cylinders, the lab size sigma mixer is able to provide combined functions of compressing, stretching, folding, kneading & mixing, which makes it widely used in the chemical, food, sealing compound and paint industries, among others.
HOW IT WORKS:
in the lab size z blade sigma mixer, there are two special designed z-shaped rotating elements installed in a w-shaped chamber, the intersection of which forms a saddle piece and meeting tangentially just above the saddle.
怎么买足球竞猜 the z blade arm rotate at different speeds (usually in the ratio of 3:2) and in opposite direction. the mixing action is a combination of bulk movement, smearing, stretching, folding, dividing, and recombining as the material is pulled and squeezed against blades, saddle, and side walls. continually new layers of material are compressed and folded over one another and are subjected to shearing forces. new surfaces are formed and the components can penetrate.
怎么买足球竞猜 the z blades, which are ground and polished, successively sweep all points of the trough surface during each revolution, at the same time dividing the batch continuously across the saddle piece and thereby rapidly affecting a perfectly homogeneous mix.
a) Tilting tank
For small machines tilt can be of a mechanical type (handlever or handwheel). For greater machines electromechanically or hydraulically powered.
b) Extrusion screw The extrusion-discharge screw is located in the saddle section and runs in a cylindrical trough tangential to, and below the 2 mixing blades. During the mixing cycle the screw moves the material within the reach of the mixing blades, thus assuring a thorough blending of all the ingredients, and, at the same time, accelerating the mixing process. At discharge time, the direction of rotation of the screw is reversed and the mixed material is extruded through suitable die openings in the side of the machine. The extrusion screw has its own separate drive so that blades and screw operate independently.
the z blade mixer has large number of options available for the lab size sigma mixer enables it to perform particular functions or operate as a general kneader:
- 1. Tiltable tank
- 2. Bottom extruder discharge
- 3. Variable speed drive
- 4. Hydraulic drive
- 5. Special 'Duplex' kneading arms for intensive kneading
- 6. Vacuum execution
- 7. Double jacket
- 8. Overlapping arms
- 9. Double jacket and heated arms
special 'duplex' kneading arms:
怎么买足球竞猜 lab size sigma mixer which is specially designed for even more intensive kneading applications.
they are twin basin kneading machines with two horizontally arranged kneading blades, which are deeply geared into one another and strip themselves reciprocally. the kneading blades are turning acc. to a ratio 1:2. because of their different speeds, the blade sides approach and withdraw alternately. this causes high pressure tensile and shearing rates and therefore heavy friction in the kneading medium, which creates excellent dispersing and homogeneity. the shape of the kneading blades enables a steady flow of material from the side walls of the kneading trough to the middle of the kneading trough.
怎么买足球竞猜discharge way: hydraulic tilt,screw extruding,bottom valve.
Funcation: can be cooling or heating(electrical,cycle hot water/oil).
Type: normal type, pressure type, vacuum type.
Material: SS304,SS316 or carbon steel can be choose
Speed: controlled by frequency converter,or fixed
Blades&Chamber:can be fine polished
Widely used in high viscosity product
Resins, Sealant, silicon rubber, glue/ adhesive, paint, dye, BMC/CMC, pigment, plastics, batteries.
Bubble gum, dough, chewing gum, soft candy, cheese etc.
Some medicines & medical materials.